SB-G(W) vertical and horizontal two type pipeline pump and other pipeline pumps are most suitable for series installation in the pipeline, with the advantages of compact footprint and convenience, is a supplement to the small horizontal centrifugal pump in this respect, but the vertical pipeline pump should not be large-scale, otherwise the advantages are lost. Therefore, the SB-G(W) two type pipeline pump series products produced by the company have a target limited to 0.55 ~ 90KW motor power range is just right, W horizontal type has the
characteristics of pipeline pump and maintains the comprehensive advantages of the unparalleled SB horizontal pump high efficiency and energy saving, easy to disassemble, which is suitable for general application more suitable for air conditioning, heating and other water circulation system.
1、All series of pumps are designed, manufactured and inspected according to the pressure 1.6Mpa standard, to ensure no water seepage and safe operation within 1.6Mpa conditions. If the user chooses more than 1.6Mpa, be sure to put forward special treatment in advance.
2、In order to ensure the 1.6Mpa pressure standard of the product, the pump shell is all cast with ductile iron, and is equipped with advanced mechanical seal to ensure no water leakage within 12,000 hours of continuous operation. But do not run without water or water for 30 seconds, in order to prevent dry friction damage to the machine seal, so the test positive and negative rotation, please only point operation and not continuous operation.
3、The main shaft of the pump is the motor rotor. The whole shaft is made of 3Cr13 stainless steel tempered treatment. The impeller of the pump is all made of 2Cr13 stainless steel precision casting, which can ensure no rust and long-term reliability
4、SB-G(W) type water pump performance range: Flow 3 ~ 1000m³/h, head 4 ~ 67m,
Inlet and outlet diameter 50 ~ 250 (mm), pump shell pressure 1.6Mpa, Working water temperature t: pump suction pressure ≤0.1Mpa/cm², t
≤80℃,
Motor power 0.55 ~ 90KW, all with YE3 series B5, B35 type extended shaft motor.
|